Xiaobian Zhizhao Top Ten Tips to Buy Solid Wood Furniture

Nowadays, with the improvement of living standards, people pay more and more attention to the concept of environmental protection in the process of decoration. In this way, solid wood furniture has been loved by the majority of owners. Can face expensive solid wood furniture, how do we choose? Let's take a little bit of knowledge. Because of the high price, solid wood furniture is a symbol of grade and identity in many consumers' minds, but now many consumers can't tell the difference between solid wood furniture and general panel furniture, and it is not clear how to buy real. Good quality solid wood furniture. In fact, experts tell us that as long as the following ten steps to do, everything will become very simple. 1. Determine if the furniture is really made of solid wood. A mystery to determine whether solid wood furniture is: wood grain and knots. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side. 2. Determine what kind of tree is made of solid wood. This is a direct impact on price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while precious mahogany furniture mainly uses rosewood, wenge, and rosewood. The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap. 3. Observe the pros and cons of wood. Open the furniture cabinet door and drawer to observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell. 4. Observe the wood for defects. The main force-receiving parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails. 5. Observe the strength of the board. The surface of the board can be pressed with a finger to feel the fastness of the board. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The drawer bottom plate should be pressed by hand to test the strength. Generally, the bottom of the partition plate is multi-layered, and the area is large. The partition should be made of five-layer board. Doors and drawer switches should be flexible. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the surface paint film of the product is not allowed to wrinkle, stick and leak paint. 6. Check stability and safety. Observe whether there is a tilt of the drawer or the door frame, whether there is a skew of the eye caused by the twisted eye socket or the eye hole is too large, and the hoe is not strict. Wooden furniture should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You should push the top corner of the furniture or sit on one side and try to make sure the furniture is firm. 7. Check the interface. It is advisable to use a dovetail joint or a butterfly joint. Heavier furniture should be screwed with a protective block in the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached. 8. Check the slides and latches of the drawer. The drawer should be solid and secure with the screws tightened inside. Pull out the drawers, the movable tabletop, the door and other parts to ensure that they can be used freely and properly connected. 9. Check the surface. Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, avoid the roughness of the table legs, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles. 10. Turn the furniture upside down. Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the strip and the buckle fastened? There are no excess glue and filler in the seams. Summary: Through the introduction of the above ten purchase skills of solid wood furniture, I believe that if you have the need to purchase, you can still remind you when you are shopping. It may be worth collecting, maybe you need these solid wood furniture buying techniques someday.

Metal to Metal Seat Gate Valve

BS5163 Metallic seated cast iron gate valve:DN40~DN600,PN10/PN16 Metallic seated cast iron gate valve ; BS5163 Metallic seated cast iron gate with by pass:DN350~DN600; PN10/PN16 Metallic seated cast iron gate with by pass;

BS5163 Metallic seated cast iron gate valve with bevel box:DN350~DN600;PN10/PN16 Metallic seated cast iron gate valve with bevel box;

Metal Seat Gate Valve,Metal Seat Gate Valve With Bypass,Gunmetal Seat Gate Valve With Bypass,Ductile Iron Gate Valve With Bypass

SUZHOU RSF VALVE CO.,LTD , https://www.rsf-valve.com