What type of mortar pump

When the user uses the mortar pump, the first step needs to be lubricated with white plaster. Under the pressure of the pump cylinder pressure, it will drive into the leaner sand to prevent the pipeline from being blocked. The mortar pump is characterized by small volume, Light weight, flexible and convenient. The main components of the mortar pump impeller, pump housing and shaft seal device. Learn mortar pump which models for the purchase and use of these products have a very important role. What type of mortar pump 1, piston mortar pump: At home and abroad for the most ideal and most effective kind of performance cement grouting pump, widely used in highways, bridges, municipal buildings, tunnels, ports, embankments, subways, underground works Such as construction and construction products pressure grouting, conveying mortar and spraying operations. Piston mortar pump structure is novel, simple and compact, small size, safe and reliable work, convenient, easy to maintain, high efficiency. 2, HB-3 mortar pump: It is a kind of machine that presses the grout into the tensioning tunnel. It is divided into two working methods: plunger and Screw. Through it, the grouted grout is pressed into the holes after prestressed tension Road, in order to achieve the purpose of bonding, anti-corrosion; motor drive reducer and piston or plunger reciprocating motion, through the role of one-way control pulsating pressure slurry. At the same time can also be used for bridges, culverts, mines, tunnels and deep foundation grouting reinforcement, spraying support. 3, HJB-6 mortar pump: for the coal-fired boilers in addition to the application of slag slurry pump. More in this industry called mortar pump. This pump is widely used, with wear-resistant, anti-corrosion characteristics. Its impeller is installed in the pump housing, and fastened on the pump shaft, the pump shaft directly driven by the motor. The pump housing has a liquid suction inlet and suction pipe connection. Liquid enters the pump through the bottom valve and suction tube. The liquid discharge port on the pump housing is connected to the discharge pipe for working. The mortar pump used in our country is mainly used for perfusion of prime grout. It can be used for floor hollowing cement grouting, structural reinforcement cement grouting and other construction projects. Run out of the machine immediately after the pipe material with water wash, to clean the water as the general cleaning standards for water, then the machine and the tube into the room for storage, easy to use the next time. With the mortar pump type models continue to grow, the use of such products and development has been a lot of users agree and attention. I believe in the future it will be more bright future.

Chemical Anchor

Hebei Qianmu Fastener Manufacturing Co., Ltd , https://www.qmjgjfasteners.com