What is a fire escape rope

[ Huaqiang Security Network News ]

What is a fire escape rope

Escape rope is a kind of rope tool that can be used in fire to save, save or transfer property. It is flame retardant. The escape rope has a buckle and an insurance card lock, and the tensile strength reaches the national standard. The length of the escape rope is selected according to the user's floor depending on the situation. It is widely used in multi-storey buildings and has strong practicality. Although the escape rope plays a big role in the fire, in fact many people will not be able to use it in an emergency because they will not use it.

This requires the public to learn the relevant knot rope technology and achieve skilled operation after purchasing the escape rope, in order to truly save themselves in the event of a fire. When using the escape rope, firstly, attach one end of the escape rope to a solid place such as a pillar or a railing, then wear the seat belt and then descend it along the wall. At present, the escape ropes sold in the market are basically equipped with a simple descending device, which does not require manual control to reduce the speed. If there is no simple descending device, the knotting method can be used to increase the point of focus and facilitate the decline. In addition, there is a descending device fixed to the wall. When a fire occurs, the public does not need to fix the escape rope. Just wear the seat belt and then descend from the window, balcony, etc. away from the fire.

As for how to purchase qualified escape ropes, the fire department recommends that the public first check the factory certificate, production date and shelf life. For online shopping supplies, the public needs to choose qualified and guaranteed stores.

8000 Lbs Electric Winch

4x4 Winch is a kind of winch which is powered by direct current electricity provided by the vehicle's electrical system and pull the vehicles out of trouble through the cable or synthetic ropes. It is typically mounted to a vehicle's front or rear bumper. Winch electric is one of the necessary tools for off road adventure.

8000LBS Line Speed And Amp Draw(First Layer)

8000LBS Line Speed And Amp Draw(First Layer)
Line Pull	lb	No	4000	6000	8000
Line Pull	kg	LOAD	1812	2718	3624
Line Speed	ft/min	33.59	20.93	14.33	10.76
Line Speed	m/min	10.24	6.38	4.37	3.28
Motor Current	Amps	72	200	250	300

8000LBS Line Speed And Amp Draw(First Layer)
Layer of Cable		1	2	3	4
Rated Line Pull per Layer	lb	8000	6000	4000	3000
Rated Line Pull per Layer	kg	3636	2727	1818	1364
Length of Cable on Drum	ft	11.28	23.94	38.00	45.92
Length of Cable on Drum	m	3.438	7.3	11.586	14

Typical Applications: off-road vehicles, agricultural vehicles, ATV all-terrain vehicles, yachts, fire rescue vehicles, road barrier vehicles and other special vehicles, special vehicles.

Winch Electric

Usages:

Plug the winch remote control into the winch. Your winch should have come with a remote control attached to a long cord. Look for the plug at the end of the cord and attach it to the corresponding receptacle on the outside of the winch. Run the remote control cord from the winch to the driver`s seat and place the remote control in your vehicle

Put on a pair of thick gloves. Never handle a winch cable without gloves on. The cable could cut your hands.

Find something in front of your car to anchor your winch to. A large tree trunk, boulder, or other vehicle is ideal. Don`t anchor your winch to something small and weak or you risk breaking it. Try to find an anchor that`s straight in front of your vehicle.

Use the disengage lever to release the winch cable. The disengage lever should be located on the outside of the winch. The lever should have an option that says [free spool" or [disengaged." Turn the lever to that option. This will release the cable so you`re able to manually pull it out from the winch.

Pull the winch cable all the way to the anchor. Don't pull too much of the cable out or you'll create unnecessary slack. Set the end of the cable down next to the anchor.

If the winch cable doesn't reach the anchor, look for another anchor that's closer to your vehicle.

Wrap a tree trunk protector around the bottom of the anchor. A tree trunk protector is a thick nylon strap with two loops, one on each end. Wrap the protector around the anchor so the two end loops are facing you. Hold the two end loops in your hand.

If your winch didn`t come with a tree trunk protector, you can order one online or find one at your local hardware store.

Hook a D-shackle through the 2 loops on the protector. A D-shackle is a curved shackle with a large pin that screws in and out of the shackle. Remove the pin from the D-shackle and put the curved part of the D-shackle through both of the loops on the tree trunk protector. Once the loops are on the shackle, reinsert the pin and twist it to tighten it into place.

Hook the winch hook to the D-shackle with the tip facing up. The winch hook is the hook at the end of the winch cable

Turn the disengage lever back to [engaged." You want the lever to be back in the position it started in before you released the winch cable. This will prevent more cable from coming out of the winch.

Use the winch remote to slowly pull the winch cable taut. Press the button on the remote control to start pulling the winch cable back into the winch. This will cause the winch cable to tighten. Stop pressing the button when the cable is taut

Our Services

1. OEM service is available.

2. Fast producing time.

3. Inspect products one by one before shipping

4. Cheapest price for electric and hydraulic winches

5. Reply promptly in 24 hours.

If you have any questions, please contact with us directly. Compass winches are produced by With High Quality and Good Appearance. Welcome you can visit our Factory. For inquiry, please directly send mail to us.

electric mini winch, mini electric winch, electric winches for boats

Suzhou DAO Material Technologies Co.,Ltd , https://www.dao-compass.com