![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
1 tools in place, ready to prepare items before decoration: tape measure, calculator, large plate clip (folder list, receipts used); In addition, ready old cotton towel, for later rubbing the brick brick, plastic bags ( Wrap around pipe connections to prevent clogging of dirt). 
2 Measurement To measure the area involved in the renovation process: tiling area, wall paint area, floor area, wallpaper area, and main wall size. Especially in the later period, it is necessary to design the wall size of furniture. 
3 Main body demolition and reform, so that the space is more practical The demolition of the main body is a project on the first step of the renovation of the rough house, mainly including the demolition of walls, walls, spade walls, demolition of heating, change plastic windows and so on. After the demolition of the modified garbage, it must be cleared out in time to ensure the cleanness of the rough room, but also to facilitate the construction. 
At this point, the finished door should be set. At this time, it is best to look through the cabinets, the hood, the stove, and the water heater. 
4 Hydroelectricity Reconstruction, Arranging the Use of Each Space Before the hydropower reform, the cabinet designer should come to the door to make the first measurement and help you determine the power and waterway reconstruction plan. Water heaters, it is also best to send someone to design the location of the power supply and the interface according to the model you have determined. Remind the rough room renovation steps: the wall below the basin, it is best to leave a power outlet, easy to install a small kitchen treasure. The air-conditioning hole and power source should be placed on the wall of the bedside as much as possible to avoid air-conditioning blowing directly to people. The blank room must maintain a 20-centimeter gap between strong electricity and weak points. For example, leave a distance of 20 cm between the outlet and the cable. 
5 tiling, before the first thing with a solid textured tiling, buy a floor drain. To buy a dedicated washing machine or shower floor drain, but also to deodorant function. After waterproofing and brushing, the rough room renovation steps are ready for tiling. 
6 If you do not buy finished products, let the worker's master do the brushing. There is nothing to say. Leveling, sanding, rolling, and the effect is good or bad. Absolutely depends on the craft of your oil worker. The significance of leaving the paint over again is not great, because the subsequent operation is no more dirty than the paint. 
These are some of the suggestions Xiaobian made for the decoration of the rough house. I hope to help everyone. Experience exchange decoration experience
PU Ceiling Roses decorative element breaks up large ceiling surfaces and light up your room.you may paint it to combine your funiture color, this series goods give you complete new decorative room!Except the this,we also have Ceiling Rings.
PU Ceiling Roses collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density urethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, PU Ceiling Roses can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. PU Ceiling Roses (Plaster Ceiling Roses,Large Ceiling Rose,Decorative Ceiling Rose,Polystyrene Ceiling Rose,Ceiling Medallions)are light weight for easy installation.
Advantages:
1.Modeled after original historical patterns and designs.
2.Solid polyurethane for maximum durability and detail.
3.Lightweight for quick and easy installation.
4.Factory primed and ready for paint or faux finish.
5.Can be cut, drilled, glued or screwed.
6.Can be used on the interior or exterior.
Our Service:
1. Factory direct sale with excellent quality, reasonable price and first-class service.
2. Timely delivery to every corner of the world.
3. Strong supply capacity, high-tech skills and advanced equipment can surely meet customers'requirement.
4. Launching new designs for each category every year.
5. Exquisite workmanship. All products 100% inspected.
6. Preferential freight by Famous shipping company.
7. Excellent after-sales service.
Ceiling Roses/Ceiling Medallions
Foam Ceiling Roses,Large Ceiling Roses,Decorative Ceiling Roses,Ceiling Medallions,Oval Ceiling Roses,Foam Ceiling Medallions
Suntronic New Materials Technology Co., Ltd. , https://www.dsmdecor.com