Detailed tile paving process

Tiles in the home decoration is relatively easy. We learned that we can do it ourselves. The key is to save labor costs. A total of six steps: grassroots processing → elastic line → pre-shop → paving → jointing → cleaning.

TOSO ceramic pottery ceramic

(1) Primary treatment: Dust and debris should be thoroughly cleaned, and there should be no defects such as emptying, cracking, and sanding.

(2) Stretching line: Before the construction, pop up the control line at the height of the wall, and pop up the cross line on the floor to control the floor tiles.

Space size.

(3) Pre-paving: First of all, we should strictly select the color, texture, and surface smoothness of the floor tiles based on the drawings design requirements, and then pre-shop according to the drawings. The size, color and texture errors that may occur in the pre-paving are adjusted and exchanged until the best effect is achieved, and the paving is smoothly stacked and stored.

(4) Paving: laying 1/3 dry cement mortar, mortar thickness of about 25mm. Before the tile is applied, the back of the tile shall be wetted. Place the tiles on the cement mortar as required and tap the tile finish with a rubber mallet until the flatness is reached.

(5) Stitching: Clean the joints 24 hours after the tiles have been laid, wipe the impurities in the gaps in the tiles before jointing, and use a special joint sealant.

(6) Cleaning up: During the construction process, the surface of the floor tiles should be cleaned with cotton and other materials after completion (usually after 24 hours).

Links: Decoration Selected lighting The following three points you considered?

Tile paving tile entrance decoration cement home decoration decoration design home lighting decoration home

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification	Light Duty		Heavy Duty
Rang of the Door	Single-Leaf	Double-Leaf	Single-Leaf	Double-Leaf
Door leaf max weight	100kg	100kg x 2	200kg	200kg x 2
Mounting Method	Surface mounting or built-in mounting
Open Width	700-2000mm	650-2000mm	750-2000mm	650-2000mm
Power Supply	AC 220v ± 10%, 50-60 Hz
Opening Speed	300-500mm/s (adjustable)
Closing Speed	250-550mm/s (adjustable)
Creep speed	30-100mm/s (adjustable)
Hold-open time	0.5-20s (adjustable)
Airproof Force (Max.)	>70N
Manual Pushing Force	<100N
Electronic Lock Force	>800N
Power consumption	150W
Ambient temperature	-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.spiralfastdoor.com