Top ten safety tips for straw shredders

The straw pulverizer should be fixed on the ground and can be fixed with cement. If the work location is changed frequently, the pulverizer and motor should be mounted on a base made of angle steel. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

After the straw pulverizer is installed, it should be carefully checked whether it is installed in place and checked for the installation is not strong enough. Whether the motor shaft and the pulverizer shaft are parallel, and check whether the belt tension is appropriate. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

Before starting the straw pulverizer, first turn the rotor by hand to check whether the operation is flexible and normal, whether there is collision in the casing, whether the rotation direction of the rotor is correct, and whether the motor and the pulverizer are well lubricated. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

Do not change the pulley frequently with the straw pulverizer to prevent the rotation speed from being too high or too low. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

The straw pulverizer should be evenly fed. If there are any noises, high temperature of the bearing and the body, or external spraying, stop the machine immediately and check the fault. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

When feeding, the staff should stand on the side of the straw shredder to prevent the rebounded debris from being injured. When smashing the long stalk, the hand should not be caught too tightly to prevent the hand from being brought in. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

After the straw pulverizer is operated for 300 hours, the bearing must be cleaned and the oil must be replaced. When the oil is installed, 1/3 of the gap of the full bearing housing is good, and the maximum is not more than 1/2. When the machine is stopped for a long time, the drive belt should be removed. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

After the straw pulverizer starts, it should be idling for 2 to 3 minutes, and then no work will be carried out. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

Before the straw smasher works, the staff should carefully check the materials to prevent metal, stone and other hard objects from entering the crushing chamber and causing accidents. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

The straw pulverizer stops feeding before stopping, and after the materials in the standby are removed, the power is cut off. Cleaning and maintenance should be carried out after shutdown. ssN China Feed Industry Information Network - based on feed, serving animal husbandry

Single Bowl Handmade Kitchen Sink

Single Bowl Handmade Kitchen Sink,Single Bowl Kitchen Sink,Large Single Bowl Kitchen Sink,Single Bowl Sink

Zhongshanshi JiaBaoLu Kitchen And Bathroom Products Co., Ltd , https://www.gabalusink.com