Double purification function of activated carbon filter

The activated carbon filter is made of high-quality shell carbon and coal-based activated carbon, supplemented by food-grade binders. It is processed by special technology using high-tech technology. It integrates adsorption, filtration, interception and catalysis. Effectively remove organic matter, residual chlorine and other radioactive substances in water, and have the effect of discoloration and odor removal. It is an ideal new generation product in the liquid and air purification industry.

Type: white head sintered activated carbon filter, black head with skeleton sintered activated carbon filter, granular activated carbon filter.

The activated carbon filter element is formed by adding activated carbon particles to a binder and heating and sintering. The innermost layer of the filter element is a polypropylene skeleton to strengthen the compressive strength of the filter element. The skeleton is covered with two layers of polypropylene microfiber mat, which can intercept the liquid through the carbon core to bring out particles larger than 10 microns. The carbon core outer layer is wrapped with two layers of polypropylene microfiber mat, which can intercept particles larger than 10-20 microns in the liquid, so that the filter element has the dual functions of filtration and purification. The outermost layer is a white plastic mesh sleeve, which gives the filter element a complete appearance and a neat appearance. A soft rubber cap on both ends of the filter element is provided to provide a good seal after the filter element is installed in the filter cartridge. The finished activated carbon filter is tightly packed with a plastic film to prevent the filter from being contaminated and keeping the filter element fresh.

The activated carbon filter has good adsorption and can effectively remove residual chlorine, odor, color and organic matter in water.

Activated carbon filter features:

The activated carbon filter is a true deep structure with dual functions of filtration and purification. The filter core has a nominal filtration accuracy of 10 microns. No filter aids need to be added during use, and no filtration after carbon treatment is required. Each activated carbon filter element contains 160 grams of plant sulfur-free activated carbon particles. It is used for the cleaning of electroplating solution, which causes pinhole or brittleness of the plating layer because the filter element does not precipitate fibers or other substances.

Activated carbon filter technical indicators:

Pressure resistance: 0.4Mps Operating temperature: 52°C

Rated flow rate: ≤300L/h (refers to the flow rate of filtered water per 250mm long filter element)

Size: outer diameter 65mm inner diameter 30mm

Length: 130+2mm 250+2mm (254) 500+2mm (508) 750+2mm (762) 1000+2 (1016) 1. Specifications:

Specific surface area: 800~1000m2/g;

Carbon tetrachloride adsorption rate: 50~60%;

Benzene adsorption amount: 20~25%;

Ash water content: ≤3.5%;

Iodine adsorption value: ≥800~1000mg/g;

Methylene blue adsorption value: 14~16ml/g.

Model specification

model:

CTO-W (white head sintered activated carbon filter) - 10 (length 10")

CTO-B (black head with skeleton sintered activated carbon filter) - 10 (length 10")

UDF (granular activated carbon filter) - 10 (length 10")

Specifications: (special specifications can be customized)

use:

Activated carbon filter is suitable for process water and solution purification in semiconductor, electronic device, printed circuit board, electroplating industry, food and beverage industry.

Applicable to the following industries:

1. Electronics, power industry: pure water, gas, electric liquid, printing line and so on.

2. Chemical, petrochemical: solvent, paint, magnetic pulp, detergent, liquid wax, etc.

3. Pharmaceutical and pharmaceutical industries: hospital water, pharmaceutical injections, medium liquids, etc.

Food industry: food, beverages, drinking water, alcohol, etc.

Filling Pumps

The liquid filling of the Filling Pumps only passes through the hose, does not touch the pump body, and has no valves or seals and other connecting parts. Routine maintenance only requires regular replacement of the hose, which reduces the maintenance cost of the user.
Filling Pumps, Available flow rate from 0 to 33000 ml/min,
The Filling Pumps can set the suck-back angle and speed which can reduce the liquid drip when liquid filling.
The Filling Pumps can work with a foot pedal that you can control the pump in a longer distance instead of the traditional way of the start-stop switch.

Filling Pumps,Liquid Dispensing Filling Pumps,Digital Distribution Filling Pumps,Bottle Filling Smart Dispensing Pump

Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crperistalticpump.com