Pay attention to running-in after vehicle maintenance

After the water intake vehicle is repaired, there may be some problems, and the owner can carefully observe it in daily use to find the fault. By looking and listening, I found out that there were sharp and harsh sounds or abnormal lighting and failures when using some functions. Q: My car was in the repair shop because it was soaked in water. After repairing, I always feel that the noise of the engine has become bigger. Is this normal? How to solve it?


A: Just like life needs to recuperate, car water intake is considered to be “a big illness, even if it is discharged from hospital”, it still needs careful maintenance. After all, some problems may be exposed after a period of use. Therefore, the owner is Pay special attention to the following three aspects after vehicle maintenance:


The first is to pay attention to observation. After the water intake vehicle is repaired, there may be some problems, and the owner can carefully observe it in daily use to find the fault. By looking and listening, I found out that there were sharp and harsh sounds or abnormal lighting and failures when using some functions. If you find a problem, you should contact the auto repair factory for repair, such as the sensor's fault light flashing, the seat can not move, etc., can be returned to the factory for inspection and maintenance to ensure the safe use of the vehicle. At the same time, it is recommended that the owner should pay attention to the phenomenon of idle speed instability, engine sound and car rust during driving.


Followed by strict testing. Car owners should pay attention to the regular inspection of circuits, airbags and Other mechanical components during routine maintenance. The detection of the circuit system is mainly the automobile computer board and the lamp. Nowadays, the electronic products of automobile products are getting higher and higher, and the automobile computers are commanding the electronic system of the whole car. It is very important to work well. The enemy of electronic products is “water”. Therefore, it is especially necessary to “care” the computer board when testing the influent vehicle. If the fault occurs in the automobile computer board, it will directly affect the driving safety. The detection of mechanical components is mainly the detection of the engine. Engines with poor sealing will leak oil, resulting in insufficient oil. The engine overheats due to the lack of lubrication of the oil, which can cause a blast. Also pay attention to whether there is any abnormal noise or jitter during driving. Because the influent vehicles have more hidden dangers in electrical appliances, it is more difficult to solve them in time, so the car pays special attention. It is best for the qualified owner to go to the professional repair station to inspect and maintain the vehicle every three months after the vehicle enters the water.


In the end, it is impossible to forget. Everyone knows that after buying a new car, it must be run-in first, and the vehicle will enter the "best state". However, the repaired vehicle also needs to be run-in, which is not clear to everyone. Especially those vehicles with engine water intake, after overhaul, should also be worn like a new car.

Global hardware network

Concerned about surprises

Tag: Vehicle repair Vehicle detection Fault light Best condition Computer board

Previous: 50Mn steel bar plate type cold heading die steel Next: Instrument structure principle and performance of electronic weighing instrument

A2. Basin Faucet

kaiping aida sanitary ware technology co.,ltd , https://www.jmkpaidafaucets.com

Posted on