Diatom mud is good but don't despise acceptance

The use of diatom mud to decorate the wall is not only beautiful and generous, but also very environmentally friendly. Of course, the price is quite expensive. Therefore, the decoration should be more attention, acceptance must also be from top to bottom, from left to right a little Look, then what are the main areas of attention when it comes to acceptance? Today Xiaobian tells everyone how to do it!

First, look at the color of the wall

The color of the finish is uniform, matte, no knife marks, no cracks, no missing corners, no pinholes, no bubbles.

Second, look at the wall texture

The texture is evenly distributed, with no sharp corners and stinging sensations.

Third, feel with your hand

Hand touch the wall will have a warm sense of softness.

Fourth, wipe

If there is excessive water absorption, a small amount of powder will be wiped off, but the wipe will not fall off when drying.

Fifth, yin and yang angle error

The horizontal and vertical error of the yin and yang angle is less than 3mm.

Sixth, flatness error

The error of the wall surface roughness is less than 2mm.

Seventh, with the outlet, the door and window link is clean

With the socket panel, door and window connection gap is processed evenly and smoothly, workmanship is neat and clean, and no pollution or damage to the panel and doors and windows.

Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).

Diatom mud

Reed Switch Fuel Level Sensor

Reed Switch Fuel Level Sensor, also called float fuel level senosr, it is done by sealed reed switches positioned inside the main shaft of the sensor. A float with built-in magnets then triggers the reed switch relays, generating a potential-signal with resistance, current, or voltage value that increases or decreases according to the fluid level, then give the signal to the gauge via wires, which shows the right level reading by pointer. In the whole reed switch level sensors,the float is the only moving part of the sensor,thereby minimizing potential mechanical failures to get the precision measurement.

Reed Switch Fuel Level Sensor,Fuel Float Sensor,Fuel Tank Float Sensor,Float Level Sensor, Float fuel level sensor

Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com

Posted on