In the home improvement process, acceptance is a very important link. The hidden problems and shortcomings in the decoration are discovered in a timely manner. In addition to the need for rich experience, corresponding auxiliary tools should be prepared. Here to introduce to you a few kinds of acceptance of the necessary magic and its usage.
1, tape measure function: measure the house's net height, net width and some other dimensions. The tape measure is a commonly used tool in daily life. It is mainly used to measure the net height, net width, cabinet size, etc. of the house during inspection. Check whether the reserved space is reasonable and whether the size of the cabinet is the same as the original design.
2, vertical detection rule function: vertical degree detection, level detection, flatness detection. The vertical inspection ruler is the most frequently used detection tool in home improvement supervision. It is used to detect whether the wall surface, the tile is flat and vertical, and whether the floor keel is horizontal and flat.
3, feeler function: gap size detection. Insert the head of the feeler gauge into the gap, insert it tightly, and then withdraw. The scale of the stroke is the size of the gap and check whether they meet the requirements.
4. Diagonal detection rule function: Detect the deviation of the two diagonal lines of a square object. Place the ruler on the diagonal of a square object to measure it.
5, square foot function: inside and outside the right angle detection auxiliary function: the vertical degree, level detection, detection of the door and window corner is 90 degrees. The square rule is mainly used to detect whether the corners of doors, windows and doors are at right angles. When using, just put the square rule on the corner of the corner or the inner corner of the door and window to see whether the two sides match the two sides of the ruler.
6, test hammer function: empty test. This small metal hammer, which can be retracted freely, is designed to test the hollow condition of the wall and the ground. It is judged whether there is hollowing in the wall surface by the sound of the hammering.
7, magnetic pen function: detection of steel lining. This seemingly pen-like tool has a magnet inside it that is highly magnetic and designed to test whether there is a steel liner inside the door or window. Because the interior of the qualified plastic steel window is supported by the steel liner, it can keep the door and window from being deformed. If there is a steel liner inside the door and window, the magnet pen can be absorbed tightly.
8, test socket function: detect circuit line sequence. The test socket is an indispensable tool for testing whether the line sequence in the circuit is normal. There are three indicators on the socket, indicating neutral, ground, and fire wires from left to right. When the two right lights are on at the same time, it means that the circuit is normal. When all three lights are off, it means there is no phase line in the circuit; only the middle light is on when the ground is missing; only the right light is on, it means there is no zero. line.
Links: Winter home inspections ensure good quality of living
Construction Acceptance Window Outlets Home Improvement Decoration Flooring Cupboard Doors Flooring Tiles
Build In Led Driver, Led Driver 48W,Led Driver Transformer,Led Driver Replacement
Effort Semiconductor Lighting Ltd. , https://www.effortem.com