![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
For sinks, everyone is familiar with it. It is a place for washing vegetables and washing dishes in our lives. Therefore, be cautious when installing, so as not to leak water, etc. Then, how to install the sink? Here we will introduce in detail. : Sink installation 8 steps as well as sink installation precautions, hope can help everyone.
Sink installation 8 steps:
1, fixed position
Before installation, the sink must be well-positioned and sized to facilitate the ordering of the sink. Then the floor plan must be drawn to avoid inaccurate data and rework.
In addition, after the tank is firmly installed , do not shake it to the left and right to avoid leaving gaps and loosening. Also note the tightness of the connection.
2, install the faucet and inlet pipe
Before installing the sink, the faucet and the inlet pipe must be properly installed. The inlet pipe at the other end must be connected to the inlet switch.
3, sink into the table
After the sink is placed on the countertop, it is necessary to install a matching pendant between the wall and the countertop. However, during the installation, the sealing of the sink should be taken care of, and a closed water test should be performed.
4, overflow hole, filter
The degree of sealing of the overflow holes and the filter screen determines the effect of the use of the water tank in the future, and the higher the degree of sealing, the less likely it will be a problem.
5, install a matching pendant
The installation of matching pendants is the last step in the installation of sinks. After the sinks are purchased, workers will cut the countertops of the cabinets according to the size of the sinks. If the cutting is good, the matching pendants must be installed before they can be placed on the countertops. In addition, each gap should be filled during installation to avoid problems such as water leakage.
6, drainage acceptance
After the water tank is completely installed, the water tank needs to be filled with water to perform a drainage test. If leakage occurs, the problem should be found and reworked immediately.
7, edge sealing
After the drainage test is finished, it is possible to seal the tank with silicone. However, when sealing the edges, it must be ensured that the joints between the sink and the table are even and no water seepage or the like can occur.
8, clean up
After the installation is complete, the sink should be cleaned to clean the debris in the sink. Do not pour into the sewers with water so as not to clog the drain.
Sink installation precautions:
1. The sink installation should be left at the end to avoid damage during the renovation.
2. When installing the water tank , the water in the water pipe should be removed, otherwise it may cause water leakage, rust, etc.
3, the leader must be solid, there must be no gaps, so as to avoid the phenomenon of water leakage.
4ã€Glass tape should be used for connecting the sink and water leakage.
5, when the sink is rusty, you can wipe it off with toothpaste.
Summary: The relevant knowledge of the installation of the 8-step walk and the precautions for the installation of the sink is introduced here. In fact, the installation of the sink is very simple, as long as the installation location and size are determined, then follow the above steps step by step to install, you may be interested in Try it.
Decoration process notes sink faucet switch counter cabinet door
Elastic Modulus,Compression Platen,Concrete Test Cube Mould,Testing Machine Accessory
Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com