CNC cutting machine stability is affected by the internal systems and components of the equipment

As an ordinary operator, because there is no understanding of the internal components of the cutting machine, there are often some equipment instability situations that cannot be handled.
The following are some suggestions for solving the instability of the CNC cutting machine operating system:

1. Wide temperature class, anti-vibration, maintenance-free electronic hard disk

Use the most advanced electronic hard disk to replace the mechanical hard disk, eliminate the instability of the mechanical hard disk, avoid the virus damage to the hard disk and the system, wide temperature adaptation range, anti-vibration and maintenance-free.

2. Fanless, low power, industrial grade CPU

Using a low-power CPU without a fan, not only the CPU heat is low, but also eliminates the instability of the fan, effectively improving the stability of the CNC cutting machine system.
3. DOS operating system

Using the single-task single-process DOS operating system, real-time CNC cutting is realized by hardware motion control axis card, avoiding the multi-tasking and multi-process of Windows, causing the cutting interruption to crash, and replacing it by using the "one-button" automatic cutting process of the FastCNC CNC cutting machine system. Manually cut the way.

4. Hardware axis card interpolation operation

The hardware axis card interpolation operation replaces the software interpolation operation, so that the interpolation operation is performed on the bottom layer of the computer, that is, the axis card, and does not use the Windows system, and does not require a high-frequency CPU.

As a manufacturer, this knowledge should be well understood. Here we are some knowledge about the improvement of equipment instability from the internal systems and components of the equipment . These knowledge operators must understand. In short, it is still necessary to standardize the operation and fully understand the equipment, so that we can find a solution when problems arise again.

ALUMINUM METAPHOSPHATE

PRODUCT NAME: Aluminum Phosphate, Aluminum Metaphosphate , Potassium Silicate Curing Agent, Aluminum Orthphosphate , Aluminium Acid Phosphate , Polymer Aluminum Phosphate

PRODUCT TYPE: High Temperature Materials , Binder

PRODUCT APPEARANCE:White Powder

CHECICAL CLASS:Al(PO3)3

CAS Noï¼Ž:13776-88-0.

PRODUCT APPLICATION:It is mostly used as binder and curing agent in the production of Hi-Temp Refractory Materials for kiln. It also serves as fluxing agent in the production of special glass, as binder in fabrication of ceramics or tooth, and so on.

Mainly used in producing special optical glass;Also can be used in manufacturing enamel, glaze, as well as the development of new materials, etc.

TECHNICAL DATA

Test Items	Technical Parameters
Appearance	White Powder
The PH Value	2-4
Residue on sieve(45um)%	â‰¤0.5%
P2O5 %	65-75
Al2O3 %	18-22

STANDARD PACKAGING 25kg/bag, Plastic-lined and plastic-coated woven bags or Composite paper bags.

TRANSPORT AND STORAGE

Protect against weathering and exposed under the blazing sun. Store in a cool, dry place and avoid extreme fluctuations in temperature.

Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.

Aluminum Metaphosphate

Aluminum Metaphosphate,High Temperature Materials,Aluminum Orthphosphate,Aluminium Acid Phosphate,Polymer Aluminum Phosphate

shijiazhuang city xinsheng chemical co.,ltd ,